Specifications
1.5V or 8~24V input voltage;
2.With 51 kinds of patterns;
3.Supports a variety of DMX512 control equipments;
DMX 512 to full color strip ws2801 controller
I.Feature:
1.This is a DMX512 decoder that specially designed for WS2801 and WS2811,LED constant current driver IC. It’s easy to use and wiring;
2.Supports inputting DMX512 signal directly and execute internal patterns;
3.Supports a variety of DMX512 control equipments;
4.5V or 8~24V input voltage;
5.With 51 kinds of patterns;
6.When running internal patterns, each decoder can control 2048 pixels;
7.Supports single and multiple synchronous.
II.Port Function:
Right side | IN | DAT+ DAT - GND | DMX512 input signal + pole |
DMX512 input signal - pole |
Ground |
OUT | DAT+ DAT - GND | + pole of DMX512 signal cascade to the next decoder |
- pole of DMX512 signal cascade to the next decoder |
Ground |
CLK | WS2801 clock signal output |
DATA | WS2811 and WS2801’s output signal |
GND | Ground |
VDD | The positive power supply(Same as the chosen input voltage on the left side) |
Left side | MODE | Pattern switching |
SPEED | Speed switching |
GND | Ground |
5V | Positive power supply, 5V |
8~24V | The positive power supply, 8~24V |
+5V | When clicked stands the power supply voltage is 5V |
+12v/24V | When clicked stands the power supply voltage is 8~24V |
III.NOTE:
The decoder’s power supply voltage is optional,(can be changed internally, the method will be mentioned later ) please be sure that what the power supply voltage is selected then power the decoder.
IV.Pictures:
.